Post Pics of your Smokers!!
- gurkanyeniceri
- Beginner
- Posts: 18
- Joined: Tue Jul 26, 2011 04:31
- Location: Canberra
- Contact:
Purchased a Hark (Australian) brand gas smoker. Cold smoking may only be possible with a ProQ I think. I want to sell this one and upgrade to Masterbuilt Electric in the future.
It is working well, It has a large water tray to act as a thermal mass so when you open and close the door, it puts back the heat quickly.
It is working well, It has a large water tray to act as a thermal mass so when you open and close the door, it puts back the heat quickly.
Cheers,
Gurkan Yeniceri
Gurkan Yeniceri
- Chuckwagon
- Veteran
- Posts: 4494
- Joined: Tue Apr 06, 2010 04:51
- Location: Rocky Mountains
Hi Tacklebox, the soldering Iron as heat source for the pellets is a brilliant idea, then "blowing" the smoke with an Aquarium air pump.tacklebox wrote:The smoke generator is an aluminum tube which I machined myself. The generator uses wood pellets as fuel, using a soldering iron (new) for ignition and an aquarium air pump for air.
One idea I was mingling around a while back is using a 55 gallon drum, welding a tubing brace (rolled round) at top and bottom to retain shape, then cutting a large door in to the side.
But your idea is a lot better, top loading. Fantastic looking smoker you have.
Ron
Tacklebox,
Care to share your plans for the Cold Smoker part of your smoker? I have gotten a similar designed one off the internet that I am in the process of purchasing some of the parts to make and yours looks similar (but I do notice some Differences) also allot more professionally made and I am curious in the differences between the two plans.
The one that I will be making utilizes a 3 inch diameter Schedule 40 thick wall aluminum tubing, Fence Post caps for the capping the top and bottom of the tube etc.
Any help in steering me in the right direction would be appreciated,
John
Care to share your plans for the Cold Smoker part of your smoker? I have gotten a similar designed one off the internet that I am in the process of purchasing some of the parts to make and yours looks similar (but I do notice some Differences) also allot more professionally made and I am curious in the differences between the two plans.
The one that I will be making utilizes a 3 inch diameter Schedule 40 thick wall aluminum tubing, Fence Post caps for the capping the top and bottom of the tube etc.
Any help in steering me in the right direction would be appreciated,
John
- gurkanyeniceri
- Beginner
- Posts: 18
- Joined: Tue Jul 26, 2011 04:31
- Location: Canberra
- Contact:
- gurkanyeniceri
- Beginner
- Posts: 18
- Joined: Tue Jul 26, 2011 04:31
- Location: Canberra
- Contact:
I used the Concrete Block Smoker plans with one change. Instead of using a lintel I turned a block on its side. As you can see on the bottom row below.
Inside I placed a half block to get smoke out of two different places. You can see the off set blocks for support edges.
I slanted the dirt path down to the fire pit between the tunnel blocks.
Wish me luck and I hope I will use this enough to make it a permanent structure.
Dick
Inside I placed a half block to get smoke out of two different places. You can see the off set blocks for support edges.
I slanted the dirt path down to the fire pit between the tunnel blocks.
Wish me luck and I hope I will use this enough to make it a permanent structure.
Dick
- Chuckwagon
- Veteran
- Posts: 4494
- Joined: Tue Apr 06, 2010 04:51
- Location: Rocky Mountains
Hi Dick, It sure looks like it will do the job. What are you going to use for the top? Will you have an adjustable damper? What kind of wood do you cowboys burn down there in Florida? Just a tip if I may... please remember to use only UN-treated wood to burn and UN-treated dowels if you choose wood smokesticks. Some of the stuff they treat wood with these days is pretty scary! Good luck Dick, I'm sure it will be just fine.
Best Wishes,
Chuckwagon
Best Wishes,
Chuckwagon
If it looks like a duck, walks like a duck, and quacks like a duck, it probably needs more time on the grill!
The first picture is of the shipping crate in original condition. It was used to ship glass but has seen better days. The door was too worn to be used so we'll be installing a new hinged door.
This picture is the smoker with about 14" ripped from the front and re-framed. It was just too deep to be useable so it's final internal size is going to be about 26" deep x 24" wide x 4' tall.
Next week we hang the door, cut holes for duct and likely finish the project but we'll still need to purchase a couple thermometers and install it at it's final resting place.
This picture is the smoker with about 14" ripped from the front and re-framed. It was just too deep to be useable so it's final internal size is going to be about 26" deep x 24" wide x 4' tall.
Next week we hang the door, cut holes for duct and likely finish the project but we'll still need to purchase a couple thermometers and install it at it's final resting place.
- Chuckwagon
- Veteran
- Posts: 4494
- Joined: Tue Apr 06, 2010 04:51
- Location: Rocky Mountains
That's a terrific idea Jer. All sorts of possibilities. Have you got some good pards helpin' you? What will you use for a heat source and container? Or will we have to wait to see. Good luck pal.
Best Wishes,
Chuckwagon
Best Wishes,
Chuckwagon
If it looks like a duck, walks like a duck, and quacks like a duck, it probably needs more time on the grill!