Dedicated smoker for sausage making
Dedicated smoker for sausage making
Hi everyone, I did my best and spent a lot of time trying and hoping to find any information on line (net) but with no result so I am gaving up and decided to open a new topic. Sometime ago I opened a topic on this forum asking if a "Smokin It #3" smoker will work to smoke/cook sausages but was suggested to build a custom wooden smoker by myself. While this is a great idea and easy to build it`s not doable in my case and potentially can create fire hazard: very small backyard with a short distance from my backyard to neighboring houses. I was comparing electrical and propane smokers (Smoke Hollow 44", Masterbuilt 40" and others within $300 -800 range but according to my research neither of them can maintain temperature range from 100F to 200F - they all designed for temp range from 200F and up to 350/400F and also, they are way too small. I found one on Sausage Maker site https://www.sausagemaker.com/30-lb-Digi ... 9-1012.htm but learned from other reviews that it`s not able to hold #30 of meat in it but also and more importantly prone to temp fluctuation.... I don`t care about cooking briskets, shoulders or ribs (in fact, I don`t mind either) but my main point is I need to be able to smoke/cook sausages.... Currently I have 6 years old (but in great condition) Brinkman Trailmaster Limited Charcoal smoker/grill with 962 sq.in. of cooking space. It`s tied with a small grill by 4" diameter and 6 yards long pipe: small grill acts as a smoke generator. This makes me able to provide cold smoke when needed. The problem is I have to light up charcoal separately in the chimney, then add it to my main smoker fire box (on the right side) multiple times in order to maintain needed temperature in the smoker. Even if I try to do my best - this is just not possible: the smoker is long enough (68.11 in) so it`s hotter in the right side and getting colder toward to left side of the smoker (I have three thermometers installed). I have to rotate grates all the time which is PIMB. There is a lot wise and experienced sausage makers and simply nice guys on this forum so I am not losing my hope just yet.... Thank you in advance!
You know what, try calling or emailing Miroslaw Stanuszek at Sausage Maker Co.
He's a super nice guy willing to help anyone figure out problems, he always been there for me.
Email: mstan@sausagemaker.com
He's a super nice guy willing to help anyone figure out problems, he always been there for me.
Email: mstan@sausagemaker.com
BobK wrote: "As far as temp control on any of the electric smokers, there are lots of good plug and play controllers available now in the 20-30$$ range...that are accurate. Set at any temp you desire."
Thank you BobK. I was considering PID controllers with electrical smoker but was not sure if this going to help. What I get from different sources is those smokers engineered the way it`s probably almost impossible to maintain certain temperature in them as well as to keep low temp. Maybe I just need to go ahead and buy a smoker and try it... Anyway, I was thinking about Auber Programmable PID Controller for $143.50 (for Bradley smokers). I guess it should work with any smoker but will consult with Auber about that. It`s not cheap but what I found from many reviews this guy is pretty reliable to maintain constant temperature.... So should be a good investment.
Kijek wrote: "try calling or emailing Miroslaw Stanuszek at Sausage Maker Co. He's a super nice guy willing to help anyone figure out problems"
Thank you, Kijek. Make sense - I am going to send an email to him today. Will see if he is able to help me with this....
Boris
Thank you BobK. I was considering PID controllers with electrical smoker but was not sure if this going to help. What I get from different sources is those smokers engineered the way it`s probably almost impossible to maintain certain temperature in them as well as to keep low temp. Maybe I just need to go ahead and buy a smoker and try it... Anyway, I was thinking about Auber Programmable PID Controller for $143.50 (for Bradley smokers). I guess it should work with any smoker but will consult with Auber about that. It`s not cheap but what I found from many reviews this guy is pretty reliable to maintain constant temperature.... So should be a good investment.
Kijek wrote: "try calling or emailing Miroslaw Stanuszek at Sausage Maker Co. He's a super nice guy willing to help anyone figure out problems"
Thank you, Kijek. Make sense - I am going to send an email to him today. Will see if he is able to help me with this....
Boris
In my home made smoker i use the A-419 controller( http://cgproducts.johnsoncontrols.com/m ... 125188.pdf ). I manually set the temp for the 1500watt element and use a bradley smoke generator when smoke is required. In the past on other smokers I used a Sauna control thermostat from Robertshaw if I recall, copper bulb style and manual dial but within the temp ranges. I was also in communication with Fireboard labs this week about their meat thermometer as it is capable of controlling a fan I asked if it could control a heat source instead. Their comment was they are looking into it as people have been asking.
Edit for link fix
Edit for link fix
Last edited by Cdub on Sat Mar 17, 2018 13:29, edited 1 time in total.
Sorry I'm late to the party but I'd love to chime in. I currently own a smokin-it #4. I had a number 3d for a while but needed something bigger. The smokin it model 3d and above (3.5, 4 and 5) hold temps between 0f up to 300f. This not only makes it ideal to cook and cold smoke but also you can use this as a fermentation chamber if you make salami.
I love mine and it works like a charm. Not only that but the man that owns smokin it has exceptional customer service skills. He will help you out whenever he can.
Last week I used my Smokin it to ferment 80 pounds of salami and it held a temp of 80f no problems!!
With that being said a good temp control unit will fix you up as well..
I just bought an auber unit for something different and am extremely happy with the results. Nice products..
Any questions let me know.
I love mine and it works like a charm. Not only that but the man that owns smokin it has exceptional customer service skills. He will help you out whenever he can.
Last week I used my Smokin it to ferment 80 pounds of salami and it held a temp of 80f no problems!!
With that being said a good temp control unit will fix you up as well..
I just bought an auber unit for something different and am extremely happy with the results. Nice products..
Any questions let me know.
I believe those smokers are now made with Auber temp controls.
https://www.smokingmeatforums.com/threa ... er.157512/
https://www.smokingmeatforums.com/threa ... er.157512/
cajuneric, I believe you are talking about Smokin-It # 4D. Yes, these smokers come with Auber temp controller. They are big enough and can hold up to 75# of meat (not sausages though).
The price for this smoker is $1,899.99 with free shipping and it's out of my price range.
Three days ago I pulled the trigger and bought a 30# stainless steel, insulated smoker from TSM.
The price is $799 plus $50 shipping. In spite it's not equipped with Auber temp controller (I wish it was) I was told by store reps that the smoker is able to hold a temperature within plus/minus 2 degrees.
I will update you on this smoker as soon as I receive and try it... in about four weeks.
The price for this smoker is $1,899.99 with free shipping and it's out of my price range.
Three days ago I pulled the trigger and bought a 30# stainless steel, insulated smoker from TSM.
The price is $799 plus $50 shipping. In spite it's not equipped with Auber temp controller (I wish it was) I was told by store reps that the smoker is able to hold a temperature within plus/minus 2 degrees.
I will update you on this smoker as soon as I receive and try it... in about four weeks.
Last edited by bolepa on Fri Apr 20, 2018 14:37, edited 2 times in total.
You can get one of these, but check the wattage on your heating element. This is only good for 1200W.bobrap wrote:Can you expand on this a bit more? I have a MES 40 and would like better temp control
https://www.amazon.com/Inkbird-Max-1200 ... controller
My DIY smoker uses a 1500W element, so I use one of these with an in-line 30A relay.
https://www.amazon.com/Inkbird-All-Purp ... controller
Also doubles as a refrigerator controller for my curing chamber.